Wednesday, September 8, 2021

How to Tell The Difference Between Porcelain and Ceramic Tiles

Before you buy tile for a tiling project, you should be able to identify porcelain and ceramic tiles. Both are made from a mixture of clays and other materials, then kiln-fired. Both porcelain and ceramic tile are in the category of “ceramic tile.” Ceramic tiles are divided into two groups: non-porcelain tiles (or ceramic) and porcelain tiles. In general terms, porcelain tiles are a higher quality and more resistant to damage, since they’re fired in a kiln at higher temperatures and made of less porous materials.[1]

[Edit]Steps

[Edit]Identifying Loose Tiles

  1. Inspect the tiles’ finish to see how smooth it is. You can do this either by visually inspecting the tiles’ top surfaces or by running your fingers over the top of the tiles. Porcelain tiles have a fine-grained finish that is smoother than the finish on ceramic tiles. So, if the finish is slightly bumpy or coarse when you touch it, you’re dealing with non-porcelain (ceramic) tile.[2]
    Tell The Difference Between Porcelain and Ceramic Tiles Step 1 Version 3.jpg
    • If the tiles are already glazed, flip them over and look at the unglazed underside.
  2. Look for chips in the glaze to identify ceramic tile. Look closely at the glaze: if it’s chipped, you will be able to see the tile’s white or tan base. This is a sure sign that the tile is ceramic.[3] Porcelain tiles are sometimes, but not always, glazed. Most high-quality porcelain tiles will have a consistent color that goes through the top, body, and bottom of the tile. Ceramic tiles, on the other hand, are nearly always glazed.
    Tell The Difference Between Porcelain and Ceramic Tiles Step 2 Version 3.jpg
    • Glazed porcelain tiles are much harder and are more resistant to wear and damage than non-porcelain ceramic tiles.
  3. Examine the sides of the tile for a white, tan, or red color. While porcelain tiles can be colored, ceramic tiles will always have a white, tan, or red color, with a colored glaze on top. So, if you see that the sides (and base) of the tile are any other color other than white, tan, or red, you can be sure that you’re dealing with a porcelain tile.[4]
    Tell The Difference Between Porcelain and Ceramic Tiles Step 3 Version 2.jpg
    • Some cheap, low-quality porcelain tiles may not have the color mixed through the body of the tile. Avoid purchasing these tiles.
  4. Compare the costs of the two tile types. In nearly every scenario, porcelain tiles are more expensive than ceramic tiles: they take more time to produce, are more versatile, and tend to last longer. If you’re looking at two types of tiles in a hardware or home-supply store, non-porcelain (ceramic) tiles will be a little cheaper.[5]
    Tell The Difference Between Porcelain and Ceramic Tiles Step 4 Version 2.jpg
    • As a broad rule of thumb, porcelain tile usually costs approximately 60% more than ceramic tile.

[Edit]Identifying Already-Installed Tiles

  1. Note the location in which the tiles have been installed. Ceramic and porcelain tiles are each better suited to distinct locations in a home. Porcelain is often installed in laundry rooms, bathroom floors, bathroom walls, shower stalls, and around bathtubs. Porcelain tile is more durable than ceramic because of its hardness, and porcelain is also more resistant to moisture.[6]
    Tell The Difference Between Porcelain and Ceramic Tiles Step 5 Version 2.jpg
    • Ceramic tile, on the other hand, is most often installed as flooring in high-traffic areas such as an entry way or a heavily-used hallway.
  2. See if the tiles are stained or discolored. If so, they’re almost certainly ceramic. Porcelain tiles are very dense and have been designed to be impervious to stains. So, most staining substances (e.g., red wine) can be wiped off of them easily. Ceramic, on the other hand, is light, porous, and can absorb staining materials relatively easily.[7]
    Tell The Difference Between Porcelain and Ceramic Tiles Step 6 Version 2.jpg
    • Stains on ceramic tiles could also come from foot traffic (dirt, mud, snow, etc.) if the tiles are located in an entryway.
  3. Inspect the faces of the tiles for uniform size and shape. The “face” of the tile is the top portion which faces upward or outward on installed tiles. Porcelain tiles have sharply-formed faces which are all exactly uniform in size. Due to their durability, porcelain tiles can be “rectified,” or cut to highly specific dimensions for complete uniformity. This also allows the porcelain tiles to be grouted together with only small gaps between tiles.[8]
    Tell The Difference Between Porcelain and Ceramic Tiles Step 7 Version 2.jpg
    • If there is any discrepancy between the size of the tiles, you’re dealing with ceramic tile.


[Edit]Video

[Edit]Tips

  • Non-porcelain (ceramic) tiles are generally made from red or white clay mixtures. They’re colored with an assortment of tile dyes. The tiles are finished with a durable glaze which carries the color and pattern of the finished tile.
  • Ceramic tiles can be installed both on walls and in floors and are softer and easier to cut than porcelain. These non-porcelain ceramic tiles are more prone to wear and chipping than porcelain tiles.
  • Porcelain tiles are generally made by pressing together the dust from porcelain clays. This results in a tile that is denser and more durable than ceramic tile.[9]

[Edit]Related wikiHows

[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/3jSclGN

No comments:

Post a Comment