Replacing the ink cartridge in your HP Officejet Pro 8600 is considered a routine printer maintenance procedure. When your HP Officejet printer runs out of ink, you can replace the ink cartridge yourself by accessing the printer’s cartridge compartment and removing the old ink cartridge.
Steps
- Verify that your HP Officejet Pro is powered on. The printer must be turned on when replacing the ink cartridge.
- Place your fingers into the slot located at the left side of the printer, then pull forward to open the door to the cartridge compartment. The printer’s carriage will move to the left side of the printer while the cartridge compartment is opened.
- Wait for the printer’s carriage to stop moving and become completely silent.
- Push in on the front part of the ink cartridge to release that specific cartridge.
- Remove the old ink cartridge by pulling it toward you out of the slot.
- Hold the new ink cartridge so that the contacts on the cartridge are facing toward the printer.
- Gently push the new ink cartridge forward into the slot until it clicks into place. The colored dot on the cartridge label must match the color of the dot displayed on the slot.
- Close the door to the cartridge compartment.
- Wait for the printer to complete its warm-up sequence and become quiet. You may now begin using your Officejet Pro 8600.[1]
Warnings
- Never lift the carriage’s latch handle to insert new ink cartridges, as this action could result in damage to the printing mechanism and trigger printing problems.
Sources and Citations
Cite error: <ref> tags exist, but no <references/> tag was found
from How to of the Day http://ift.tt/1LJ0Qrh
No comments:
Post a Comment